BVXNS - 5230 SERIES, SPILFYTER FOR NON-HAZARDOUS (SUPDAT)
- MSDS: BVXNS
- Manufacturer: JV MANUFACTURING CO INC
- Product Name: 5230 SERIES, SPILFYTER FOR NON-HAZARDOUS (SUPDAT)
- National Stock Number: 6810-00N054329
Product Identification
Product ID:5230 SERIES, SPILFYTER FOR NON-HAZARDOUS (SUPDAT)
MSDS Date:04/29/1993
FSC:6810
NIIN:00N054329
MSDS Number: BVXNS
Responsible Party
GREEN BAY, WI 54304
US
Emergency Phone: 414-337-4944
Info Phone: 800-334-9092
Cage: IO899
Contractor
Telephone: 800-334-9092
Cage: IO899
Ingredients
SULFUR
CAS: 7704-34-9
RTECS: WS4250000
Fraction By Weight: <95.0%
OSHA PEL N/K
ACGIH TLV: N/K
SILICA, ARMORPHOUS, PRECIPITATED AND GEL; (SILICON DIOXIDE)
CAS: 112926-00-8
RTECS: VV7315000
Fraction By Weight: >5.0%
OSHA PEL 20 MPPCF (MFR)
ACGIH TLV: 10 MG/M3 (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:MAY CAUSE IRRIT.
EXPERIENCED AS MILD DISCOMFORT & SEEN AS SLIGHT REDNESS OF THE EYE.
SKIN:MAY CAUSE IRRIT. INHAL:MAY CAUSE IRRIT TO THE UPPER
RESPIRATORY TRACT. CHRONIC:NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:EYES:IMMED FLUSH W/PLENTY OF WATER FOR @ LEAST 15 MINS. HOLD
EYELIDS APART WHILE FLUSHING TO RINSE ENTIRE SURF OF EYE & LIDS
W/WATER. SEEK MED ATTN. SKIN:REMOVE CONTAMD CLTHG. BRUSH OFF EXCESS
POWDER W/DRY TOWEL. WASH AFFECTED AREA W/PLENTY OF SOAP & WATER
FOR SEVERAL MINS. SEEK MED ATTN IF IRRIT DEVELOPS/PERSISTS.
INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP. IF BRTHG
IS DFCLT,(SUPDAT)
Fire Fighting
Flash Point Method:CC
Flash Point:370F,188C
Extinguishing Media:USE WATER SPRAY, ALCOHOL FOAM, DRY CHEMICAL OR
CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN POSITIVE PRESS
MODE & FULL PROT CLTHG I/A/W 29 CFR 1910.120. HAZ WASTE OPERATIONS
& EMER RESPONSE.
Unusual Fire/Explosion Hazard:WHEN HEATED TO DECOMP, TOXIC FUMES OF
SULFUR DIOXIDES (SO*2) ARE EMITTED. DUST MAY FORM
FLAMMABLE/EXPLOSIVE MIXTURE IN AIR.
Accidental Release
Spill Release Procedures:AVOID BRTHG DUST. CONTAIN LEAKING/SPILLED
MATL. CLEAN-UP USING SHOVELS, SWEEPING/VACUUM SPILLED MATL & PLACE
INTO APPRVD DISP CNTNR FOR PROPER DISPOSAL. ALL SPILLS SHOULD BE
HNDLD ACCORDING TO PREDETE RM PLAN I/A/W 29 CFR 1910.120-HAZ
WASTE(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY & WELL VENT AREA
AWAY FROM THOSE CHEM LISTED IN INGRED SECTION. KEEP AWAY FROM FLAMM
MATL & SOURCES OF HEAT OR FLAME.
Other Precautions:PROTECT CNTNRS FROM DMG. KEEP CNTNR TIGHTLY CLSD. DO
NOT BREATH DUST. DO NOT GET IN EYES, ON SKIN, OR CLOTHING.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED AIR PURIFYING RESPIRATOR
WITH APPROPRIATE DUST & METAL FUME PROT. NIOSH/MSHA APPRVD SHOULD
BE USED FOR LARGE SCALE APPLICATIONS.
Ventilation:LOCAL EXHAUST & MECHANICAL (GENERAL):AS APPROPRIATE.
Protective Gloves:CHEM RESIST I/A/W 29 CFR 1910.132.
Eye Protection:ANSI APPRVD CHEM GOGG & FACE SHLD.
Other Protective Equipment:CHEM RESIST CLOTHING.
Work Hygienic Practices:WORKERS SHOULD WASH EXPOSED SKIN THORO AFTER
HANDLING WITH SOAP & WATER.
Supplemental Safety and Health
MFR TRADE NAME/PART NO:MATERIALS, MERCURY CONTROL POWDER. FIRST AID
PROC:GIVE OXYG. SEEK MED ATTN. INGEST:DO NOT INDUCE VOMIT. CALL
PHYS/POIS CTL CTR IMMED. NEVER GIVE ANYTHING BY MOUTH TO UNCON
PERSO N. SPILL RELEASE:REGULATIONS & EMERGENCY RESPONSE.
Chemical Properties
HCC:V7
Boiling Pt:B.P. Text:533F,278C
Melt/Freeze Pt:M.P/F.P Text:240F,116C
Vapor Density:8.8
Spec Gravity:2.00000(H*20=1)
pH:3.9
Solubility in Water:NEGLIGIBLE (<.1%)
Appearance and Odor:YELLOW CRYSTALS, POWDER, ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXDIZING AGENTS, MOST COMMON METALS, HYDROGEN, CHLORINE,
FLUORINE, ORG MATLS @ ELEVATED TEMPERATURES.
Stability Condition to Avoid:WHEN HEATED TO DECOMP TOXIC FUMES OF
SULFUR DIOXIDES ARE FORMED.
Hazardous Decomposition Products:THERMAL DECOMPOSITION, OXIDES OF
SULFUR I.E. SULFUR DIOXIDE (SO*2), SULFUR TRIOXIDE (SO*3).
Disposal
Waste Disposal Methods:DISPOSE OF ORIGINAL (VIRGIN) MATL I/A/W FEDERAL,
STATE, & LOCAL REGS. ONCE THIS PROD ABSORBS MERCURY VAP THIS PROD
THEN TAKES ON TOX CHARACTERISTICS OF MERCURY VAP SORBED & SHOULD BE
DISP OF I/A/W ALL FED, ST, & LOC REGS FOR MERCURY VAP.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.